As we discussed in the first article of our ZEP Mountain Bike Camps Mythbuster Series, it’s generally best to view techniques in mountain biking as ’cause and effect,’ rather than ‘right or wrong.’ Understanding this is key if you wish to truly progress your skills as a rider and/or instructor. The idea of this series of articles is to highlight certain technique ‘myths’ and then explain what the actual, modern, up-to-date riding techniques are; based on physics, biomechanics and nearly two decades of teaching mountain biking and training mountain bike instructors. These articles are therefore intended for riders interested in learning some core techniques to progress their skills, or for those instructors/coaches who are looking to improve the quality, relevance and consistency of their lessons.
In our second article, we discussed braking in downhill corners, but this week we’re getting on the pedals and looking at some ways to improve your efficiency and success on steeper, more technical climbs.
When it comes to seated climbing on a mountain bike, the common technique we hear is, ‘tuck your elbows in and pull back on the bars.’ Only last week, I heard someone teaching this technique. Today we’re going to dissect this myth and hopefully highlight a more efficient way of climbing, that also allows for a greater range and freedom of movement to negotiate technical sections. So, let’s take a look at the two key points: elbows in and pulling back on the bars.Elbows In
The disadvantage of this technique is that is restricts a rider’s ability to move freely when climbing, which is particularly important for steering the handlebars and balancing on the bike. While this doesn’t matter too much on smooth, road-like climbs, it does become an issue on anything technical where riders have to negotiate turns, roots or rocks, as they climb. This technique is really a myth that comes from road biking, since it helps keep the upper body still, saving energy… so like all techniques, it has a pro and con. And for technical climbing, the pro of saving energy is outweighed by the fact that riders need to move their bike and body to stay balanced.
Pull on the Bars
Most riders pull back on the handlebars in an attempt to keep their weight over the middle of the bike, so they’re balanced on a climb. This goal makes sense. However, it’s how they are trying to stay over the middle of the bike, that’s the key. Continuously pulling on the bars takes upper body and hand strength, using energy, but also isn’t very effective at moving the rider’s centre of mass forward, over the middle of the bike. It also limits mobility, as the arms are tense from pulling, rather than keeping them relaxed to move the rider or bike, as needed. Again, not ideal for technical climbs.
Being in a position on the bike to give the best stability and therefore balance, is key to mountain biking. So, when climbing, the best thing to first try (before pulling on the bars) is to move the body into a better position. The best way to do this is to move the parts of the body that will make the biggest difference – the hips and torso.
– Slide the hips forward on the seat to find a balance point where you are centred on the bike without having to continuously pull on the bars. If you do this enough, you’ll be amazed at just how steep of a climb you can ride up without doing anything else. Some people avoid this technique, as sitting on the nose of the seat can be uncomfortable. Try adjusting the seat (lowering the nose helps for steep climbs), or finding a better seat that provides more support and comfort on the front section. Either way, moving the hips forward is important for a more stable riding position and its also provides better pedalling efficiency by placing the riders’ hips more directly over the bottom bracket.
When you’re climbing technical terrain, be sure to focus on moving your hips and chest as the primary technique to maintain balance and control on the bike. And remember, if you’re balanced into and up the climb, you can better move the bike, pick a line, pedal more smoothly, pedal harder, change gear… and generally do all the other things you need, to climb successfully! The key points of the seated climbing position, are:
– Hips Forward
– Chest and wrists low
When it gets really steep
There are, of course, times when just moving your hips forward and chest down aren’t enough, and the rider will still feel a need to gradually pull on the bars to stay over the middle of the bike and keep the wheels evenly weighted. This is also where rolling the wrists down can help. In doing so, this helps riders to pull the bike “back” underneath them, rather than pulling “up”, and lifting the front wheel off the ground. The key is to use this technique as a last resort, as opposed to it being the first thing to do. If you keep this in mind, you’ll make most of your climbs without having to continuously pull on the bars at all. Save this technique for only the steepest of climbs.
When the going gets rough
The other myth that we hear in technical climbing comes from people being told to “stand up when it’s rough, to unweight the bike”. As ever, the language we use when teaching and how we define and explain things, is so important. In this case, the terminology of ‘stand up’ often causes an undesired affect – people, literally, stand up. In doing so, their hips move forward (away from the rear wheel), while their shoulders move back and up (away from the front wheel). Their centre of mass is now high, causing stability issues, and they lack weight over the rear wheel, often causing the rear wheel to slip when they put the power down. Instead, think of ‘hovering’ or ‘crouching’, rather than ‘standing up.’
– Hips Hovering – just above the seat
– Harder gear – to avoid spinning out
For short, steeper and/or rougher sections of trail, this hovering position is a great way to maintain stability and traction, while finding some extra power and momentum from pedalling out of the seat. Riders can also use their arms and legs as suspension to help the wheels roll over rougher terrain more easily, preventing the bike from stalling at the first sign of a root or bump on the climb. Allowing the bike to move underneath and adjust to the changes in terrain, is a key advantage to moving out of the seat. This being said, because the rider is out of the seat, it’s not a position that can be sustained for long periods of time.
Efficient climbing should naturally involve constant adjustments from the rider, based on the pitch and surface of terrain. Try not to get into a ‘climbing position,’ and stay there. If it gets steeper, move forward and lower; if it eases off, you can relax and sit farther back on the seat. If there’s some roots, you’ll need to slightly raise your hips off the seat for a brief moment, as the rear wheel rolls over. Scan the terrain and decide on a plan of action ahead of time. With plenty of practice, these tips should get you climbing higher, farther and faster, with less effort.
So, next time you’re tackling a technical climb remember that moving your hips is the most effective place to start, to maintain a stable, balanced position. And try to focus on one thing at a time… there are a million tips we could give you on “how to climb,” but most riders (in any sport) can only properly think about and work on one technique at a time.
Happy Climbing people… I hope these ideas help.
Paul Howard is the Owner-Director and Head Coach of ZEPtechniques, Technical Director of the Professional Mountain Bike Instructor Association, Head Snowboard Trainer for Whistler Blackcomb SnowSchool, Technical Education Committee and 2015 Interski Team Member for the Canadian Association of Snowboard Instructors, and has been teaching mountain biking and training mountain bike instructors around the world, since the late 90’s.